Search Vulnerabilities

Authentication bypass vulnerability in Fujitsu network devices Si-R series and SR-M series allows a network-adjacent unauthenticated attacker to obtain, change, and/or reset configuration settings of the affected products. Affected products and versions are as follows: Si-R 30B all versions, Si-R 130B all versions, Si-R 90brin all versions, Si-R570B all versions, Si-R370B all versions, Si-R220D all versions, Si-R G100 V02.54 and earlier, Si-R G200 V02.54 and earlier, Si-R G100B V04.12 and earlier, Si-R G110B V04.12 and earlier, Si-R G200B V04.12 and earlier, Si-R G210 V20.52 and earlier, Si-R G211 V20.52 and earlier, Si-R G120 V20.52 and earlier, Si-R G121 V20.52 and earlier, and SR-M 50AP1 all versions.

An issue was discovered on Fujitsu ETERNUS CentricStor CS8000 (Control Center) devices before 8.1A SP02 P04. The vulnerability resides in the requestTempFile function in hw_view.php. An attacker is able to influence the unitName POST parameter and inject special characters such as semicolons, backticks, or command-substitution sequences in order to force the application to execute arbitrary commands.

The web console of FUJITSU Network IPCOM series (IPCOM EX2 IN(3200, 3500), IPCOM EX2 LB(1100, 3200, 3500), IPCOM EX2 SC(1100, 3200, 3500), IPCOM EX2 NW(1100, 3200, 3500), IPCOM EX2 DC, IPCOM EX2 DC, IPCOM EX IN(2300, 2500, 2700), IPCOM EX LB(1100, 1300, 2300, 2500, 2700), IPCOM EX SC(1100, 1300, 2300, 2500, 2700), and IPCOM EX NW(1100, 1300, 2300, 2500, 2700)) allows a remote attacker to execute an arbitrary OS command via unspecified vectors.

An issue was discovered on certain Fujitsu LIEFBOOK devices (A3510, U9310, U7511/U7411/U7311, U9311, E5510/E5410, U7510/U7410/U7310, E459/E449) with BIOS versions before v1.09 (A3510), v2.17 (U9310), v2.30 (U7511/U7411/U7311), v2.33 (U9311), v2.23 (E5510), v2.19 (U7510/U7410), v2.13 (U7310), and v1.09 (E459/E449). The FjGabiFlashCoreAbstractionSmm driver registers a Software System Management Interrupt (SWSMI) handler that is not sufficiently validated to ensure that the CommBuffer (or any other communication buffer's nested contents) are not pointing to SMRAM contents. A potential attacker can therefore write fixed data to SMRAM, which could lead to data corruption inside this memory (e.g., change the SMI handler's code or modify SMRAM map structures to break input pointer validation for other SMI handlers). Thus, the attacker could elevate privileges from ring 0 to ring -2 and execute arbitrary code in SMM.

Fujitsu ServerView Suite iRMC before 9.62F allows XSS. An authenticated attacker can store an XSS payload in the PSCU_FILE_INIT field of a Save Configuration XML document. The payload is triggered in the HTTP error response pages.

Calls to EVP_CipherUpdate, EVP_EncryptUpdate and EVP_DecryptUpdate may overflow the output length argument in some cases where the input length is close to the maximum permissable length for an integer on the platform. In such cases the return value from the function call will be 1 (indicating success), but the output length value will be negative. This could cause applications to behave incorrectly or crash. OpenSSL versions 1.1.1i and below are affected by this issue. Users of these versions should upgrade to OpenSSL 1.1.1j. OpenSSL versions 1.0.2x and below are affected by this issue. However OpenSSL 1.0.2 is out of support and no longer receiving public updates. Premium support customers of OpenSSL 1.0.2 should upgrade to 1.0.2y. Other users should upgrade to 1.1.1j. Fixed in OpenSSL 1.1.1j (Affected 1.1.1-1.1.1i). Fixed in OpenSSL 1.0.2y (Affected 1.0.2-1.0.2x).

The iconv function in the GNU C Library (aka glibc or libc6) 2.32 and earlier, when processing invalid input sequences in the ISO-2022-JP-3 encoding, fails an assertion in the code path and aborts the program, potentially resulting in a denial of service.

A malicious server can use the FTP PASV response to trick curl 7.73.0 and earlier into connecting back to a given IP address and port, and this way potentially make curl extract information about services that are otherwise private and not disclosed, for example doing port scanning and service banner extractions.

curl 7.20.0 through 7.70.0 is vulnerable to improper restriction of names for files and other resources that can lead too overwriting a local file when the -J flag is used.

curl 7.21.0 to and including 7.73.0 is vulnerable to uncontrolled recursion due to a stack overflow issue in FTP wildcard match parsing.

The Raccoon attack exploits a flaw in the TLS specification which can lead to an attacker being able to compute the pre-master secret in connections which have used a Diffie-Hellman (DH) based ciphersuite. In such a case this would result in the attacker being able to eavesdrop on all encrypted communications sent over that TLS connection. The attack can only be exploited if an implementation re-uses a DH secret across multiple TLS connections. Note that this issue only impacts DH ciphersuites and not ECDH ciphersuites. This issue affects OpenSSL 1.0.2 which is out of support and no longer receiving public updates. OpenSSL 1.1.1 is not vulnerable to this issue. Fixed in OpenSSL 1.0.2w (Affected 1.0.2-1.0.2v).

ntpd in ntp before 4.2.8p14 and 4.3.x before 4.3.100 allows remote attackers to cause a denial of service (daemon exit or system time change) by predicting transmit timestamps for use in spoofed packets. The victim must be relying on unauthenticated IPv4 time sources. There must be an off-path attacker who can query time from the victim's ntpd instance.

The Fujitsu TLS library allows a man-in-the-middle attack. This affects Interstage Application Development Cycle Manager V10 and other versions, Interstage Application Server V12 and other versions, Interstage Business Application Manager V2 and other versions, Interstage Information Integrator V11 and other versions, Interstage Job Workload Server V8, Interstage List Works V10 and other versions, Interstage Studio V12 and other versions, Interstage Web Server Express V11, Linkexpress V5, Safeauthor V3, ServerView Resource Orchestrator V3, Systemwalker Cloud Business Service Management V1, Systemwalker Desktop Keeper V15, Systemwalker Desktop Patrol V15, Systemwalker IT Change Manager V14, Systemwalker Operation Manager V16 and other versions, Systemwalker Runbook Automation V15 and other versions, Systemwalker Security Control V1, and Systemwalker Software Configuration Manager V15.

A vulnerability was found in Hibernate-Validator. The SafeHtml validator annotation fails to properly sanitize payloads consisting of potentially malicious code in HTML comments and instructions. This vulnerability can result in an XSS attack.

An issue was discovered in OpenSSH 7.9. Due to the scp implementation being derived from 1983 rcp, the server chooses which files/directories are sent to the client. However, the scp client only performs cursory validation of the object name returned (only directory traversal attacks are prevented). A malicious scp server (or Man-in-The-Middle attacker) can overwrite arbitrary files in the scp client target directory. If recursive operation (-r) is performed, the server can manipulate subdirectories as well (for example, to overwrite the .ssh/authorized_keys file).

An issue was discovered in OpenSSH 7.9. Due to missing character encoding in the progress display, a malicious server (or Man-in-The-Middle attacker) can employ crafted object names to manipulate the client output, e.g., by using ANSI control codes to hide additional files being transferred. This affects refresh_progress_meter() in progressmeter.c.

In OpenSSH 7.9, scp.c in the scp client allows remote SSH servers to bypass intended access restrictions via the filename of . or an empty filename. The impact is modifying the permissions of the target directory on the client side.

The protocol engine in ntp 4.2.6 before 4.2.8p11 allows a remote attackers to cause a denial of service (disruption) by continually sending a packet with a zero-origin timestamp and source IP address of the "other side" of an interleaved association causing the victim ntpd to reset its association.

libcurl 7.1 through 7.57.0 might accidentally leak authentication data to third parties. When asked to send custom headers in its HTTP requests, libcurl will send that set of headers first to the host in the initial URL but also, if asked to follow redirects and a 30X HTTP response code is returned, to the host mentioned in URL in the `Location:` response header value. Sending the same set of headers to subsequent hosts is in particular a problem for applications that pass on custom `Authorization:` headers, as this header often contains privacy sensitive information or data that could allow others to impersonate the libcurl-using client's request.